This telegraph system installs the transmitter in the wheelhouse and the receiver in the main engine control area (engine control room or near the machine), and corresponds utilizing the function of the micro-computer. Commands and responses can be exchanged with simple operations between the transmitter and the receiver, concerning the operating conditions of the main engine.
Transmitter (VDR output-enabled)
Receiver TAS-200BV
| Power supply | AC100 / 110V 50 / 60HZ 1φ AC200 / 220V 50 / 60HZ 1φ DC24V |
|---|---|
| Handle fine-tuning dial | |
| A potentiometer and micro-switch can be installed into this unit. The handle has a fine-tuning mechanism, and can be used for the remote control of the main machine, CPP etc. | |
Transmitter / receiver
TPR-220 (flat type)
| Power supply | AC100 / 110V 50 / 60HZ 1φ AC200 / 220V 50 / 60HZ 1φ DC24V |
|---|---|
| Equipped with the STAND BY / GONG STOP press buttons (receiver only) | |
Logger VML-2008
| Connected to the telegraph system, this logger prints automatically the telegraph commands, responses and control areas, together with the relevant time, date and month data. | |
| Printed information | |
|---|---|
| Commands, responses, control areas, and the relevant time, date and month data (The optional printing of (integrated) rotation frequency of the main machine is available.) Thermal serial dot method |
|
| Dot configuration | 7 × 5 |
| Printable digits | 40 |
| Printing dimensions | 85 mm |
Sound speaker SP-S / Gong G
| Sound speaker SP-S |
|---|
|
| Gong G |
|
